Instructions

How to attach a strap to the watch?

All straps are interchangeable and have quick release pins. The quick release pins allow for easy attachment and detachment of the straps. Before changing the straps place your watch face down on a clean surface. Next, look for the pins on the back of the strap. Pull the pin a bit and move the springbar in between the lugs on the watch case. The shorter strap with buckle should always be secured above the logo and the longer strap below the logo. 

 

How to attach the butterfly clasp to the leather strap?

Your watch should have come with an adjustment tool in the watch box. Use this adjustment tool to push the springbar at the the end of the leather strap (near the fixed loop). Move the openings of the butterfly clasp around the springbars with the logo facing up. Release the adjustment tool from the springbar again to lock the butterfly clasp into place.

 

How does the butterfly clasp work?

Once you have attached the butterfly clasp, you can set the strap to the desired length. Open the clasp by pulling the part with the logo towards you. Next, move the clasp along the strap and secure at the desired length. The leather straps may be a bit stiff at first but will loosen up as you wear it. To avoid the clasp from opening put your finger on the clasp first and move the leather strap through the loops. 

 

How to adjust the length of the mesh strap?

Your watch should have come with an adjustment tool in the watch box. Use this adjustment tool to flick open the part in the middle (below the small arrow). Move the middle part along the strap to the desired length and shut it again to secure the adjustment.